Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 29
Filter
1.
Journal of Korean Medical Science ; : 658-661, 2015.
Article in English | WPRIM | ID: wpr-100417

ABSTRACT

We intended to determine that virtual endoscopy and laparoscopy of the stomach based on serially sectioned cadaver images is beneficial. Therefore, the outlines between the gastric wall and lumen were traced using the new female data of the Visible Korean to build a volume model. While the outlines were expanded at appropriate thicknesses, the stomach was observed endoscopically and laparoscopically in comparison with a chosen sectioned image. Four layers (mucosa, submucosa, muscular layer, and serosa) of the stomach were discernible by their proper colors in the sectioned images. All layers except the submucosa were identified in the endoscopic and laparoscopic views by using consistent colors. The stepwise expansion of the outlines revealed thickness of each layer as well as whether the thickness was uniform. Our ideas and the Visible Korean images could be a robust resource of virtual reality learning for medical students and clinicians.


Subject(s)
Adult , Female , Humans , Cadaver , Gastroscopy , Imaging, Three-Dimensional , Laparoscopy , Models, Anatomic , Stomach/pathology
2.
Anatomy & Cell Biology ; : 210-216, 2013.
Article in English | WPRIM | ID: wpr-66344

ABSTRACT

The corresponding author of the study has been sketching comic strips to explain anatomy in a humorous manner. All the anatomy comic strips, including those in Korean (650 episodes) and English (451 episodes), can be viewed on the homepage (http://anatomy.co.kr). Such comic strips were created with the aim of assisting medical students. However, their impact was unknown, and therefore, we surveyed the students' responses. We noted that anatomy grades were better in the students who read the comic strips. The comics helped the trainees chat with individuals with and without a medical background. The authors also considered comments on the problems with the comic strips and attempted to find solutions. The episodes are being currently used and further produced for educational purposes. To support this effort, the readers' valuable opinions will be continuously collected and assessed.


Subject(s)
Humans , Anatomy, Artistic , Education, Medical , Students, Medical , Surveys and Questionnaires
3.
Anatomy & Cell Biology ; : 128-135, 2012.
Article in English | WPRIM | ID: wpr-14603

ABSTRACT

Stereoscopic surface models of human organs can be manipulated in real time. This is a significant feature of an interactive simulation system used for clinical practice. Objective surface models are obtainable from the accumulation of each structure's serial outlines, followed by surface reconstruction. The segmented images including the outlines can be divided into outlined images, white-filled images, and color-filled images. The purpose of this study was to report the benefits of the three types of segmented images for surface reconstruction. For the raw data, sectioned images of a male cadaver head were used. In the sectioned images, 91 structures were delineated for the preparation of 234 serial outlined images. The outlined images were converted into white-filled and color-filled images; the reverse conversion was also possible. The outlined images, including the original sectioned images, could be the source not only of surface models but also of volume models. The white-filled images, with a minimal file size, were preferred for separate surface reconstruction of the individual structures. The color-filled images, which allowed for recognition of the entire outlined structures simultaneously, were regarded as a good choice for the construction of several surface models. For the process, we employed a variety of software packages including those for animation, where the images were compatible. This information can be used by other investigators to build their own three-dimensional models. In addition, the surface models of detailed structures in the head, accompanied by the corresponding sectioned and segmented images, will hopefully contribute to various simulations that can be useful to clinicians.


Subject(s)
Humans , Male , Anatomy, Cross-Sectional , Cadaver , Head , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Models, Anatomic , Research Personnel
4.
Journal of Korean Medical Science ; : 849-856, 2012.
Article in English | WPRIM | ID: wpr-159032

ABSTRACT

In the Visible Korean project, 642 three-dimensional (3D) surface models have been built from the sectioned images of a male cadaver. It was recently discovered that popular PDF file enables users to approach the numerous surface models conveniently on Adobe Reader. Purpose of this study was to present a PDF file including systematized surface models of human body as the beneficial contents. To achieve the purpose, fitting software packages were employed in accordance with the procedures. Two-dimensional (2D) surface models including the original sectioned images were embedded into the 3D surface models. The surface models were categorized into systems and then groups. The adjusted surface models were inserted to a PDF file, where relevant multimedia data were added. The finalized PDF file containing comprehensive data of a whole body could be explored in varying manners. The PDF file, downloadable freely from the homepage (http://anatomy.co.kr), is expected to be used as a satisfactory self-learning tool of anatomy. Raw data of the surface models can be extracted from the PDF file and employed for various simulations for clinical practice. The technique to organize the surface models will be applied to manufacture of other PDF files containing various multimedia contents.


Subject(s)
Humans , Male , Cadaver , Human Body , Image Processing, Computer-Assisted , Models, Biological , Software , User-Computer Interface
5.
Anatomy & Cell Biology ; : 151-159, 2011.
Article in English | WPRIM | ID: wpr-159925

ABSTRACT

Unlike volume models, surface models, which are empty three-dimensional images, have a small file size, so they can be displayed, rotated, and modified in real time. Thus, surface models of male urogenital organs can be effectively applied to an interactive computer simulation and contribute to the clinical practice of urologists. To create high-quality surface models, the urogenital organs and other neighboring structures were outlined in 464 sectioned images of the Visible Korean male using Adobe Photoshop; the outlines were interpolated on Discreet Combustion; then an almost automatic volume reconstruction followed by surface reconstruction was performed on 3D-DOCTOR. The surface models were refined and assembled in their proper positions on Maya, and a surface model was coated with actual surface texture acquired from the volume model of the structure on specially programmed software. In total, 95 surface models were prepared, particularly complete models of the urinary and genital tracts. These surface models will be distributed to encourage other investigators to develop various kinds of medical training simulations. Increasingly automated surface reconstruction technology using commercial software will enable other researchers to produce their own surface models more effectively.


Subject(s)
Humans , Male , Computer Simulation , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Research Personnel , Urogenital System , Visible Human Projects
6.
Anatomy & Cell Biology ; : 169-177, 2010.
Article in English | WPRIM | ID: wpr-31955

ABSTRACT

Palm creases are helpful in revealing anthropologic characteristics and diagnosing chromosomal aberrations, and have been analyzed qualitatively and quantitatively. However, previous methods of analyzing palm creases were not objective so that reproducibility could not be guaranteed. In this study, a more objective morphologic analysis of palm creases was developed. The features of the improved methods include the strict definition of major and minor palm creases and the systematic classification of major palm creases based on their relationships, branches, and variants. Furthermore, based on the analysis of 3,216 Koreans, palm creases were anthropologically interpreted. There was a tendency for palm creases to be evenly distributed on the palm, which was acknowledged by the relationship between major and minor creases as well as by the incidences of major creases types. This tendency was consistent with the role of palm creases to facilitate folding of palm skin. The union of major palm creases was frequent in males and right palms to have powerful hand grip. The new method of analyzing palm creases is expected to be widely used for anthropologic investigation and chromosomal diagnosis.


Subject(s)
Humans , Male , Anthropology, Physical , Chromosome Aberrations , Dermatoglyphics , Hand , Hand Strength , Incidence , Skin
7.
Korean Journal of Physical Anthropology ; : 187-198, 2010.
Article in English | WPRIM | ID: wpr-37920

ABSTRACT

The sectioned images (SIs) of the pelvis from a female cadaver are the best source of realistic three-dimensional (3D) models of the female urogenital system. The purpose of this research is to present SIs and outlined images of the female pelvis with improved quality, which may be used to produce 3D models to simulate virtual dissection or surgery of the female urogenital and adjacent structures. A pelvis of Korean female cadaver which preserved buttock curve was scanned with 3T MR and CT machines. The pelvis was embedded and milled at 0.1 mm intervals. All sectioned surfaces were photographed to create horizontal SIs. On the Photoshop, 73 structures were outlined in the SIs to create outlined images. Once the structures were outlined, volume and surface models of the structures could be produced. A total of 222 MRIs and 222 CTs of a female pelvis were obtained. 2,220 SIs of the pelvis were obtained (0.1x0.1x0.1mm3-sized voxels; 48 bits color). 222 outlined images of 73 structures were prepared at 1mm intervals. Once the structures were outlined, 3D volume and surface models of the structures were produced without the help of the computer programmers using MRIcro and Maya software. We have produced high quality SIs of the female pelvis accompanied by corresponding MRI and CT images. 3D volume and surface models of the female pelvic structures have been constructed. These computerized models may serve as the basis for future realistic medical simulation programs that may enhance clinical understanding of pelvic anatomy.


Subject(s)
Female , Humans , Anatomy, Cross-Sectional , Buttocks , Cadaver , Computer Simulation , Imaging, Three-Dimensional , Magnetic Resonance Imaging , Pelvis , Tomography, X-Ray Computed , Urogenital System
8.
Journal of Korean Medical Science ; : 1710-1715, 2010.
Article in English | WPRIM | ID: wpr-15545

ABSTRACT

Authors had prepared the high-quality sectioned images of a cadaver head. For the delineation of each cerebral gyrus, three-dimensional model of the same brain was required. The purpose of this study was to develop the segmentation protocol of cerebral gyri by referring to the three-dimensional model on the personal computer. From the 114 sectioned images (intervals, 1 mm), a cerebral hemisphere was outlined. On MRIcro software, sectioned images including only the cerebral hemisphere were volume reconstructed. The volume model was rotated to capture the lateral, medial, superior, and inferior views of the cerebral hemisphere. On these four views, areas of 33 cerebral gyri were painted with colors. Derived from the painted views, the cerebral gyri in sectioned images were identified and outlined on the Photoshop to prepare segmented images. The segmented images were used for production of volume and surface models of the selected gyri. The segmentation method developed in this research is expected to be applied to other types of images, such as MRIs. Our results of the sectioned and segmented images of the cadaver brain, acquired in the present study, are hopefully utilized for medical learning tools of neuroanatomy.


Subject(s)
Aged , Humans , Male , Cerebrum/anatomy & histology , Imaging, Three-Dimensional , Models, Anatomic , Software
9.
Journal of Korean Medical Science ; : 135-141, 2010.
Article in English | WPRIM | ID: wpr-64129

ABSTRACT

Sectional anatomy of human brain is useful to examine the diseased brain as well as normal brain. However, intracerebral reference points for the axial, sagittal, and coronal planes of brain have not been standardized in anatomical sections or radiological images. We made 2,343 serially-sectioned images of a cadaver head with 0.1 mm intervals, 0.1 mm pixel size, and 48 bit color and obtained axial, sagittal, and coronal images based on the proposed reference system. This reference system consists of one principal reference point and two ancillary reference points. The two ancillary reference points are the anterior commissure and the posterior commissure. And the principal reference point is the midpoint of two ancillary reference points. It resides in the center of whole brain. From the principal reference point, Cartesian coordinate of x, y, z could be made to be the standard axial, sagittal, and coronal planes.


Subject(s)
Aged , Humans , Male , Anatomy, Cross-Sectional , Brain/anatomy & histology , Brain Mapping , Cadaver , Image Processing, Computer-Assisted , Tomography, X-Ray Computed
10.
Journal of Korean Society of Medical Informatics ; : 209-216, 2009.
Article in Korean | WPRIM | ID: wpr-198293

ABSTRACT

OBJECTIVE: Cadaver's sectioned images with high resolution and real color could be used as the source of realistic three-dimensional images. If the sectioned images are registered to a patient's MRIs, three-dimensional images with high resolution and real color that fit the patient, can be produced; the three-dimensional images enable realistic virtual surgery for the patient. The objective of this study was to verify the registration of a cadaver's sectioned images to a patient's head MRIs. METHODS: The sectioned images of the heads of cadaver were associated with segmented images selected at 3 mm intervals. The patient had his head MR scanned at 3 mm intervals; the MRIs were segmented. Software to register the cadaver's sectioned images to the patient's MRIs was developed. On this software, the corresponding dots were identified on both the sectioned images and the MRIs either manually or automatically using segmented images. RESULTS: The registered sectioned images corresponded to the patient's MRIs. Both manual and automatic registrations were satisfied. CONCLUSION: Further study is needed for registering sectioned images to actual patients.


Subject(s)
Humans , Cadaver , Head , Imaging, Three-Dimensional
11.
Korean Journal of Anatomy ; : 277-284, 2009.
Article in Korean | WPRIM | ID: wpr-653607

ABSTRACT

Whole body of a Korean male cadaver was serially milled to make sectioned images. Segmentation of various anatomical structures can expand the utilization of the sectioned images such as three-dimensional (3D) reconstruction of the structures of real human. Following previous outlining of lower limb's structures, we decided to make segmented images of upper limb's structures in detail. Ninety-one structures (a skin, 32 bones, 49 muscles, 6 arteries, and 3 nerves) in the left upper limb were segmented in 628 sectioned images. While doing this, we developed more efficient technique for segmentation. To draw the outlines of various structures more quickly, sectioned images were filtered first and then outlines were drawn by 'quick selection' tool and other tools on the Photoshop. Also, outlines were automatically generated by interpolation using Combustion software. We made coronal and sagittal segmented images, browsing software of the serially sectioned images, volume 3D images, and surface 3D images for verifying segmentation. These segmented and sectioned images of the upper limb are expected to help other researchers make 3D images and various software of upper limb and to have widespread applications in both medical learning and research.


Subject(s)
Humans , Male , Arteries , Cadaver , Imaging, Three-Dimensional , Learning , Muscles , Skin , Upper Extremity
12.
Journal of Breast Cancer ; : 20-26, 2009.
Article in English | WPRIM | ID: wpr-18348

ABSTRACT

PURPOSE: Although adjuvant chemotherapy improves the survival of premenopausal breast cancer patients, it could induce the premature menopause. The objective of this study was to investigate the incidence and risk factors of chemotherapy-induced amenorrhea (CIA) and recovery for young ( 30 mIU/mL. RESULTS: A total of 324 patients were included in this study. Of these patients, 261 patients (80.6%) developed amenorrhea just after the completion of chemotherapy. During follow-up, 77 patients (29.5%) resumed menstruation. Amenorrhea rates at 6, 12, 24, and 36 months after chemotherapy were 72.2%, 66.6%, 58.1%, and 55.5%. Women who recovered from amenorrhea were significantly younger than the women who did not recover (p<0.001). Patients treated with cyclophosphamide, methotrexate and 5-fluorouracil (CMF) less frequently recovered from amenorrhea than patients who were treated with anthracycline or taxane-based chemo- therapy (p<0.001). CONCLUSION: The age of the patient was the most important factor for the development of CIA. Patients treated with a CMF regimen and older patients showed poor recovery from CIA. These results could be helpful to make decisions about the treatment strategies for premenopausal young women.


Subject(s)
Female , Humans , Amenorrhea , Antineoplastic Combined Chemotherapy Protocols , Breast , Breast Neoplasms , Chemotherapy, Adjuvant , Cyclophosphamide , Fluorouracil , Follow-Up Studies , Incidence , Menopause, Premature , Menstruation , Methotrexate , Risk Factors
13.
Journal of Korean Medical Science ; : 375-383, 2009.
Article in English | WPRIM | ID: wpr-79583

ABSTRACT

Unlike volume models, surface models, which are empty three-dimensional images, have small file size, so that they can be displayed, rotated, and modified in a real time. For the reason, the surface models of liver and neighboring structures can be effectively applied to virtual hepatic segmentectomy, virtual laparoscopic cholecystectomy, and so on. The purpose of this research is to present surface models of detailed structures inside and outside the liver, which promote medical simulation systems. Forty-seven chosen structures were liver structures such as portal triad, hepatic vein, and neighboring structures such as the stomach, duodenum, muscles, bones, and skin. The structures were outlined in the serially sectioned images from the Visible Korean Human to prepare segmented images. From the segmented images, serial outlines of each structure were stacked; on the popular commercial software, advanced surface reconstruction technique was applied to build surface model of the structure. A surface model of the liver was divided into eight models of hepatic segments according to distribution of the portal vein. The surface models will be distributed to encourage researchers to develop the various kinds of medical simulation of the abdomen.


Subject(s)
Humans , Asian People , Computer Simulation , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Liver/anatomy & histology , Models, Anatomic , Models, Biological , Portal Vein/anatomy & histology , Software , Tomography, X-Ray Computed
14.
Journal of Breast Cancer ; : 133-138, 2008.
Article in Korean | WPRIM | ID: wpr-205807

ABSTRACT

PURPOSE: The role and safety of aromatase inhibitors (AIs) in young breast cancer patients with chemotherapy-induced amenorrhea (CIA) has not been established. The goal of this study was to investigate the safety and efficacy of AIs in young breast cancer patients with CIA. METHODS: From December 2000 to December 2006, 58 patients with hormone receptor positive breast cancer under the age of 45 were treated with AIs as adjuvant therapy. All patients had amenorrhea for more than three consecutive months at the time of treatment. We evaluated the rates of recovery of ovarian function during the treatment, and analyzed the association of the recovery of ovarian function with age, body mass index (BMI), chemotherapy regimen, radiation therapy, and the use of tamoxifen. RESULTS: Recovery of ovarian function was observed in 16 patients (27.6%). The univariate analysis showed that ovarian function was more frequently recovered in patients younger than 40 yr of age, treated with chemotherapy regimens other than Cyclophosphamide, Methotrexate, 5-Flurouracil (CMF), without a history of tamoxifen therapy, and with a higher BMI. The multivariate analysis confirmed that the type of chemotherapy (p=0.034) and the history of tamoxifen therapy (p=0.043) were independent factors significantly associated with the restoration of ovarian function. CONCLUSION: The results of this study suggest that AIs should be considered, with caution in young women with CIA; these agents may promote the unwanted recovery of ovarian function. Especially, in those patients who were not treated with CMF chemotherapy or tamoxifen, where the rates of recovery of ovarian function were higher.


Subject(s)
Female , Humans , Amenorrhea , Aromatase , Aromatase Inhibitors , Body Mass Index , Breast , Breast Neoplasms , Cyclophosphamide , Methotrexate , Multivariate Analysis , Tamoxifen
15.
The Journal of the Korean Orthopaedic Association ; : 760-765, 2008.
Article in Korean | WPRIM | ID: wpr-651342

ABSTRACT

PURPOSE: We wanted to examine the accuracy of the lower limb alignment and implant positioning that was obtained with using the electromagnetic (EM) navigation technique. MATERIALS AND METHODS: We examined 64 patients who underwent 100 TKAs with using EM navigation technique from July 2006 to February 2007. Sixty-two patients who underwent 100 TKAs with using the conventional technique between August 2005 and July 2006 were used as controls. We assessed the mechanical axis and the alpha, beta, gamma and delta angles in the postoperative radiograph of each patient and we compared them among the two groups. RESULTS: The patients in the EM navigation group achieved better accuracy than did the conventional group in terms of the postoperative mean mechanical axis (1.2degrees vs. 2.3degrees). Less variations in the coronal femoral component and the tibial component angle were observed in the navigation group (femur: 89.3degrees vs. 88.7degrees; tibia: 89.6degrees vs. 89.3degrees, respectively), although the difference in the coronal tibial component angle was not significant. CONCLUSION: The use of EM navigation technique in TKA does not always guarantee the precise alignment of the mechanical axis in all planes, as compared to using the conventional technique. Yet it is useful for obtaining better coronal alignment of the femoral component.


Subject(s)
Humans , Arthroplasty , Axis, Cervical Vertebra , Knee , Lower Extremity , Magnets , Osteoarthritis
16.
Journal of Korean Society of Medical Informatics ; : 471-483, 2008.
Article in Korean | WPRIM | ID: wpr-34151

ABSTRACT

OBJECTIVE: Unfolding is a rendering method to visualize organs at a glance by virtually incising them. Although conventional methods exploit gray-scale volume datasets such as CT or MR images, we use the Visible Korean Human dataset preserving actual color. This can be helpful for the study of anatomical knowledge. Segmented images of Visible Korean Human dataset store the boundary of organs. Since medical experts manually perform the segmentation from anatomical color images, it is very time-consuming. In general, therefore, some images selectively sampled with interval from entire color images are segmented. When we generate a segment volume dataset with the selected images, final results are deteriorated due to lack of segmentation information for missed images. In this paper, we solve this problem by generating intermediate images without performing a manual segmentation. METHODS: Firstly, after comparing differences of organ's contours in between two consecutive segmented images, we represent the differences as a user-defined value in the intermediate images. This procedure is repeated for all pairs of manually segmented images to reconstruct entire volume data consist of manually segmented images and their intermediate images. In rendering stage, we perform the radial volume ray casting along with the central path of target organ. If a ray reaches to a region having the user-defined values, we advance over the region without compositions to the boundary of that region. Then the color composition is begun by performing backtracking, since the advanced region is regarded to the thickness of it. RESULTS: As a result, we can produce high quality unfolding images for the stomach, colon, bronchus, and artery of the Visible Korea Human dataset. CONCLUSION: Since our approach can be applied to virtual dissection including actual human colors, it is helpful for the endoscopy and anatomy studies.


Subject(s)
Humans , Arteries , Bronchi , Colon , Endoscopy , Korea , Stomach
17.
Journal of Korean Society of Spine Surgery ; : 67-72, 2008.
Article in Korean | WPRIM | ID: wpr-82391

ABSTRACT

STUDY DESIGN: Retrospective radiologic assessment OBJECTIVES: To assess the clinical importance of MRI for the diagnosis of posterior spinal ligament complex injuries in thoracolumbar fractures. SUMMARY OF LITERATURE REVIEW: Evaluation of spinal instability is important in thoracolumbar fractures. When simple radiography and CT alone are performed, spinal instability may be missed, especially that involving the posterior spinal ligament complex. MATERIALS AND METHODS: Eighty-seven patients who were evaluated using simple radiography, computed tomography (CT), and magnetic resonance imaging (MRI) between March 1994 and March 2003 were included in the study. The local kyphotic angle was measured on lateral radiography, and it was then compared to the fracture pattern on MRI. Statistical analysis was performed using ANOVA. RESULTS: There was no correlation between the local kyphotic angle on radiography and fracture involvement on MRI (p=0.106). In 41 patients who were found to have involvement of the anterior column on CT, 25 had anterior column involvement, 4 had middle column involvement, and 12 had posterior column involvement on MRI. In 36 patients who were found to have involvement of the middle column on CT, 17 had involvement of the middle column and 19 had involvement of the posterior column on MRI. The fractures of the ten patients who were found to have posterior column involvement on CT were all seen on MRI. The coincidence of fracture patterns between CT and MRI, which was evaluated using Cohen's Kappa analysis, was 0.434. The sensitivity of CT compared with MRI was 0.741 in the middle column and 0.243 in the posterior column. CONCLUSIONS: Many thoracolumbar fractures are missed on both simple radiography and CT. MRI is essential for accurate diagnosis of posterior spinal ligament complex injuries, especially when there is involvement above the middle column, or when canal encroachment is seen on CT.


Subject(s)
Humans , Ligaments , Magnetic Resonance Imaging , Retrospective Studies , Spinal Fractures
18.
Journal of Korean Society of Medical Informatics ; : 385-392, 2007.
Article in Korean | WPRIM | ID: wpr-227815

ABSTRACT

OBJECTIVE: After drawing and stacking contour of structures, which are identifed in the serially sectioned images, three-dimensional (3D) images can be made by surface reconstruction. The 3D images can be selected and rotated in a real time. The purpose of this research is to compose software of automatic surface reconstruction for making 3D images. METHODS: Contours of 55 structures in the 613 magnetic resonance images of whole body were drawn to make segmented images. We composed automatic software for stacking contours of a structure, for converting the contours into polygons, and for connecting vertices of the neighboring polygons to fill gaps between polygons with triangular surfaces. The surface reconstruction software was excuted to make 3D images of 55 structures. RESULTS: Virtual dissection software, on which 3D images could be selected and rotated, was composed. CONCLUSION: For other research, this like program can be composed for automatic surface reconstruction; several kinds of commercial software can be used for manual or automatic surface reconstruction. Investigators might choose one of the methods in consideration of their only circumstances.


Subject(s)
Humans , Imaging, Three-Dimensional , Research Personnel
19.
Journal of Korean Society of Spine Surgery ; : 263-269, 2007.
Article in Korean | WPRIM | ID: wpr-15733

ABSTRACT

STUDY DESIGN: A prospective radiologic assessment. OBJECTIVES: To compare the changes of dimensions of the intervertebral disc and neural foramen between the anterior lumbar interbody fusion and the posterolateral fusion in the lumbar spine. SUMMARY OF LITERATURE REVIEW: There are few reports comparing an anterior lumbar interbody fusion with pedicle screw fixation and a posterolateral fusion with pedicle screw fixation. MATERIALS AND METHODS: We studied 62 patients with degenerative lumbar diseases who underwent minimal anterior lumbar interbody fusion with pedicle screw fixation (group I, 40 patients) or who underwent posterolateral fusion with pedicle screw fixation (group II, 22 patients). We measured the height of disc and the height, width, and area of the neural foramen measured in 1-mm reconstructive sagittal images of computed tomography before and 6 months after the operation. The factors were independently measured by three different observers. RESULTS: Disc height was increased by a mean of 39.1+/-3.28% in group I and 3.1+/-2.99% in group II. The height of the neural foramen was increased by a mean of 18.7+/-4.21% in I and 1.0+/-2.34% in II. The area of neural foramen was increased by a mean of 21.5+/-3.50% in I and -2.1+/-4.39% in II, with significant differences between groups in all parameters. CONCLUSION: The minimal anterior lumbar interbody fusion with pedicle screw fixation was superior to posterolateral fusion with pedicle screw fixation for increasing disc height and the height and area of neural foramen.


Subject(s)
Humans , Intervertebral Disc , Prospective Studies , Spine
20.
Journal of Breast Cancer ; : 248-253, 2007.
Article in Korean | WPRIM | ID: wpr-123867

ABSTRACT

PURPOSE: Malignant phyllodes tumors are rare breast tumors. Information on the prognosis and optimal treatment of these lesions is not yet sufficient. The aim of this study was to determine parameters that predict the recurrence of malignant phyllodes tumors of the breast. METHODS: Retrospectively, we reviewed the medical records and pathological slides of 23 patients with malignant phyllodes tumors that had undergone surgical treatment from 1988 to 2006. The age of the patients, tumor size, type of surgery, resection margin, adjuvant therapy and pathological characteristics of the tumors such as stromal hypercellularity, cellular phleomorphism, mitosis, margins, and stromal pattern were examined. RESULTS: The mean age of the patients was 41 yr. The tumor size ranged from 1 cm to 25 cm, with a median of 7.42 cm. The median follow-up time was 29.0 months. Recurrence was observed in 6 patients (26.1%) and the 5-yr disease free survival was 48.9%. Risk factors for recurrence of a malignant phyllodes tumor were a mitotic index greater than 10 per high-powered field (p=0.0242) and an invasive margin (p=0.0437). CONCLUSION: Frequent mitosis and an invasive margin were the principal determinants of recurrence. Patients with poor prognostic components should be treated more aggressively and the patients need more close follow-up.


Subject(s)
Humans , Breast Neoplasms , Breast , Disease-Free Survival , Follow-Up Studies , Medical Records , Mitosis , Mitotic Index , Phyllodes Tumor , Prognosis , Recurrence , Retrospective Studies , Risk Factors
SELECTION OF CITATIONS
SEARCH DETAIL